Separate Pressurized Solar Water Heater

Item No.: EM-S01
Material:
Inner tank: Stainless steel board(SUS304/2B)
Outer tank: Galvanized steel alloy
Bracket: Aluminum alloy
Heat insulation layer: Imported polyurethane
Thickness:
Inner tank: 2mm Outer tank: 0.4mm
Bracket: 1.6mm Heat insulation layer: 50mm
Coloration: Metal gray or electric light white

Working principle:
1) When the discrepant temperature of the solar collector and water tank reaches the set value, the controller shall start the circulation pump automatically;
2) The circulation pump makes heat-conducting liquid circulate automatically3) The heat-conducting liquid transfers heat to water by heat exchanger in the water tank4) In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device5) If discrepant temperature of the collector and the water tank does not reach the set value, the circulation pump shall be shut automatically;

Feature:
1) Collector separates with the storage tank. The tank can be put anywhere of the house
2) And the collector can be put on both tilted roof and flat roof
3) Module design, arbitrary combination, harmony with the building perfectly
4) Intelligent control and automatic operation
5) Anti-freeze: No water inside the tubes when it works
6) The system controller has the anti-freezing function is that the temperature circulation will operate while it reaches the fixed temperature
7) Multifunction: Bathing, washing, domestic heating
8) Workable at anytime and enjoyable.